Posted by Dan Shockley on Saturday, November 26, 2005 at 8:46PM :
In Reply to: Warn hubs posted by Arthur (in NY) on Saturday, November 26, 2005 at 9:03AM :
I have several WDX/WM300 hubs worth of parts and could possibly provide patterns. From the 10 or so hubs that I have the two pieces that I would like to see reproduced are the two large aluminum pieces. The one closest to the hub is usually ground up by poor use of a lug wrench and the outer one is often cracked under the brass dial. Hubs that have failed in this manner still operate, but this lets the dial protrude past the aluminum when it should be flush.
I am sure that other pieces fail, but most of the others are also shared with other model hubs.
Thanks,
Dan