Posted by dave on December 13, 1999 at 10:29:31:
In the middle of rewiring my 1944 wc-51 dodge weapons carrier..
Unfortunately do not have a manual yet...
Am replacing the main chassis wiring harness and could use a diagram to fiqure out connections at the firewall connector.
( I think I may be messed up as the brake light comes on when the headlights are turned on and the running light works when the
brakes are hit!)
But the rear of the harness has two connections each side, and the rear drivers side has one single lead connector and one dual lead connector. The passenger rear has two connectors, both with single wire leads.. The actual rear light assemblies can only be hooked up properly because of this...
So then why are my brakes and taillights working like this?
I must have a mix up at that firewall junction connector? Right?
Any ideas??? ANy one can help me by FAXing of sending me a copy
out of the Dodge manual so I can check this out..
Fax 978-318-6705
thank you all in advance