Posted by Don on December 28, 1999 at 18:20:28:
In Reply to: Re: Firewall,........> posted by Don on December 28, 1999 at 17:49:00:
If you look close at this first pic, you can see the indented firewall, this cab is from a 41 2-ton dodge. If you look to the right of the shock in the primered area you will see the 2 bolts that hold a wide piece of channel that was welded in a 45 for the motor to sit on, I used stock 66 imperial motor mounts, they bolt straight up and down.
In this pic you can see the transfercase mounting, I used the trans/transfer and full skid plate from my 77 ramcharger 440. Once the motor was mounted I jacked the trans/transfer right up in place and the skid plate mounting was a little wider than the frame which worked out perfectly, I used a piece of angle bolted to the frame on one angle and bolted to the skid plate on the other.
This is just another pic, sorry about the quality of these pics, hope these help.