Re: gm bellhousing


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by David N. Lundstrom on Wednesday, August 24, 2005 at 12:06PM :

In Reply to: Re: gm bellhousing posted by CGarbee on Wednesday, August 24, 2005 at 10:43AM :

If this adapter bolts to the 4BT and 6BT and these bellhousings are the same bolt pattern as the IH V-8s, then this should allow the use of the ZF series 5-speeds behind the IH V-8s also. If it locates the starter on the pass. side, the IH engines should bolt right on, using their stock starters and flywheel/clutch assembly. All that would be left to figure out would be the T/O bearing clearance/travel and the pilot bearing and clutch disc spline count. THis is VERY exciting to me.
Dave



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com