Posted by chriscase on Monday, March 28, 2005 at 12:49PM :
In Reply to: Re: FFPW temp gauge posted by Terry in Bozrah on Monday, March 28, 2005 at 6:22AM :
The 'mecanical' water temp gauge is filled with Ether, and is repairable- you need to buy a new gauge to get a bulb full of ether. Freeze the bulb, then cut the gauge off and solder to the old gauge. I used a crimp on butt connector too- remove the plastic, and don't crimp, just solder. It was an excellent pre-tinned splice. See the link in the posting below, by George. It worked for me. Cost about $20.
Follow Ups: