Re: 20" wheels for a PW


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]

Posted by Snake River 4x4 on October 10, 1999 at 20:41:37:

In Reply to: 20" wheels for a PW posted by Moby on October 09, 1999 at 10:58:39:

Yes, it has been done, Lyle VanWert did it by cutting the center out of the duece wheels and welding in a Dodge center. However, rather than screwing up a Dodge rim, we do have the Dodge pattern on CNC machine pattern. The 9:00x20 will work fine with just a little rub on the inner rear fender. The offset on the Dodge laying on the ground with the tire on is about 9", the stock duece rim and tire is about 10". So theriredically (sp) if you bolted up a duece wheel the tire would be 1" in closer to the frame, so 1" needs to be taken off the duece rim. The 9:00x20 NDT is the same height as the 11:00x18 Gama Goats that we convert on the the M37 and M715's. If you got to the 20", you would have more tire options. But the cost of properly doing the 20" rims vs the Gama Goats might be a toss up, about $100.00 per rim. Any questions, feel free to e-mail. Tom


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]