Posted by Ward on October 09, 1999 at 19:23:49:
In Reply to: '48 Power Wagon - how to remove door glass? posted by Alan on October 08, 1999 at 17:33:08:
From Dodge truck shop manual:
1. Remove inside door panels.
2. Remove trim panel.
3. Remove 4 screws from the hinge side of the
door panel, which hold the glass front run
channel in place. Draw the channel down and
out through the opening in the door panel.
4. Run the window all the way down and remove the
stop screws in the glass lower channel and
unhook the window lift rollers from the
glass lower channel.
5. Remove the weatherstrip from the lower edge of
the window opwening.
6. Turn the door hinge side of the glass upward
and lift the glass up and out of the window
opening.
7. To remove the glass from the base, or lower
channel, pull it out of the channel.
(To install the glass in the channel, drive
the channel onto the glass with a wooden or
a rubber mallet. Be certain that the channel
is in exactly the correct location on the
glass before driving it in place.
Install the glass and channel in the door
frame by reversing the foregoing operations.)