Re: Thank you gentlemen. One more question.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Tim Holloway on Wednesday, February 02, 2005 at 4:15PM :

In Reply to: Thank you gentlemen. One more question. posted by Howard in Newcastle on Wednesday, February 02, 2005 at 4:05PM :

Hi Howard,
It may work, just be sure your tip matches the slot fairly well. Take the 3 screws out all the way and thread 3/8" coarse thread cap screws into the threaded holes in the drum. Work them together and be genta with them so as not to strip the threads. Clean out the threaded holes first and it wouldnt hurt to put a dab of grease on the threads. You will probably need to back the adjustment of the shoes off to allow the drum to come off past the shoes. If you cant get it to free up from the hub, take off the wheel bearing retaining nut and remove it hub and all. You should be able to separate them after they are off the vehicle. Check the best of the forum and also Paul Cooks great website, www.texaspowerwagon.com. Lots of manuals right at your fingertips!
Tim



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com