Posted by Todd Somers on Saturday, January 15, 2005 at 7:52PM :
In Reply to: Re: Brake Booster posted by Joe_Denver on Saturday, January 15, 2005 at 1:20PM :
move the booster to a location behind the cab and mount it to the left frame rail. This was the standard location in the later years. See the picture above. This is a 68 WM300 that had a dual circuit brake system and had 2 vacuum boosters. One of the boosters has been removed (the rear one). You can see the bracket where it was mounted and the hoses & lines. If you mount your booster at the rear location the tailshaft will clear the booster. You will most likely have to drill some holes in the frame rail to mount it.
Follow Ups: