Posted by Winget on September 29, 1999 at 06:54:16:
In Reply to: oil filter # for 1/2 ton? posted by Jim Pace on September 29, 1999 at 05:17:08:
Here's the rough listing of previously gleened posts I have. Regards WAW
The Mil Junior should be the same as a MB/GPW jeep also. WAW
Napa or other part number for the 230cid Power Wagon oil filters:
The early Civilian Power Wagons with the Deluxe brand oil filter with T-handle top use the NAPA
#1011 sock-type element
Depending on the year determines if you have the large diameter filter or the smaller diameter.
I have the smaller filter element that measures 3.5" diameter by 4 1/4" long. NAPA #1010
Oil Filter for 251cid I've been using the Napa #1080 filter on my 251
Hastings LF101
Fram CH236APL works too. I like the NAPA filter, the fram had heavy paper on the top and bottom.
I have found these when searching for a filter for my 1/2 ton. The cannister I have on my dodge is the smaller diameter type, so check the filter diameter at the counter before taking home. I have seen listings that don't work for all applications. Dave A.
Carquest (WIx sock type) #85011 * listed as fitting 46 -58 models
(Fit mine well)
Fram (cannister type) # C-143A
UAP/NAPA dealer found a Fram C31 p as the nearest fit. Dimensions are 4 3/8 by 7 7/8.
AC #P115
* had this number, but I never actually bought one of these
NAPA * I saw in the listing that someone uses a NAPA #1010. I use this exact filter for my 1946 CJ2a
Willys. The number I was given at NAPA was #1071, or #1017 It fit perfectly and is what I get all of the time now.