Posted by Chris Innis on September 18, 1999 at 06:08:49:
In Reply to: Re: Master Cylinder posted by Ken Weza on September 16, 1999 at 22:13:38:
My '67 WM300 has a dual master cylinder. It's
available at the local NAPA store. I don't have the
number handy, but I got a new one for about $80
a couple af years ago.
One caution, length may be a problem in the original
location. On my truck the master cylinder is
actually under the drivers floorboard, Chrysler
basically turned it backwards with a different
bracket.
I have seen a number of people convert to a
swinging pedal arrangement which moves the master
cylinder higher, often with a slave cylinder
for a clutch at the same time. Usually it's done
to gain room around a V8 conversion.