Posted by Tim Holloway on Sunday, November 21, 2004 at 9:00PM :
In Reply to: Re: I am with Chris posted by Paul (in NY) on Sunday, November 21, 2004 at 8:27PM :
Hi Paul,
I dont know the flow of the pump. Before undertaking this, I was warned to check the pressure on the pump so as not to have too much for the steering box. I did that and it was fine. The filter I used is a plow filter, made to replace a fisher filter. The fitting size was compatable with Rays return line so I am thinking the return line size is OK. I can easily connect the angle cylinder lines to each other to complete their circuit but what about the lift cyl. line? I dont want to have to worry about accidentally hitting the plow control and blowing oil all over the place or damaging the steering box.
Thanks, Tim