Posted by tim kingsbury on Sunday, November 07, 2004 at 9:00AM :
In Reply to: Re: Does any one know if OFFENHAUSER has a web site? posted by Terry in Bozrah on Saturday, November 06, 2004 at 11:35PM :
Hi Terry,
That is right the car linkage differs from the truck as to its position. The good news is what George makes flows a whole bunch better than the offy, which really was too
low as well as restricted. There were about 10 different intake makers at one point and I still see new old stock offy's around at shows. But those who want really decent performance know they are marginal. Edmunds dual was far superior.
Now your Fenton headers were Grade A stuff, although I prefer the integrated heat riser as it does warm up the fuel a little better than straight headers.
A few of us have toyed around with recreating a performance intake, and actually by spring will have a triple carb intake for the 25" Canadian big block. Should have been out this fall but some pretty sever medical issues kept me out of it since spring.
In any case, George can direct you to lots of performance stuff, for example he has 4 or 5 cam patterns for everything from mild to wild cams. There is surpisingly lots available for the US small block 23 1/2" as
well as the Canadian 25" long block.
George's details for those who might want them are -
George Asche Jr 1693 Fertigs Road, Venus PA 16364 (814) 354-2621
Until I am back 100% it would be easiest to
just call him !
Take care
Tim
Follow Ups: