Posted by chris case on Wednesday, August 04, 2004 at 10:10PM :
In Reply to: Whl cyl assembly posted by Steve Elliot on Wednesday, August 04, 2004 at 8:19PM :
It's usually a red gel capsule. It is a thicker viscosity than brake fluid. If not, just slather brake fluid allover the rubber cups and pistons. Sometimes a cup will get folded and will leak severely, so push the parts back and forth to make sure they are in straight. 600 grit oughta do, 150 is probably about what the hones are. Bleed farthest wheel first, don't run master out of fluid or you'll have to start over.
Have FUN!