Posted by Keith on Tuesday, June 22, 2004 at 2:40PM :
In Reply to: Re: double cardan intermediate driveshaft posted by Don in Missouri on Monday, June 21, 2004 at 2:50PM :
Yes, the TH400 end is a slip yoke, which is about an inch or so out of the trans, so it can slide in and out. The distance between the stock t-case mount and the TH400 mount (rear) is so short that I doubt much front-back movement occurs, but it can if need be. I used a urethane trans mount, so it moves very little, and so about the only other movement would be from the rubber t-case mounts.