Re: metal clips


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by CJ in AK on Monday, May 10, 2004 at 7:11PM :

In Reply to: metal clips posted by Don in Missouri on Monday, May 10, 2004 at 4:40PM :

Don, I welded in all the holes also, I had many holes as the previous owner of the liftgate screwed in plywood to cover the winder holes. I used the VPW seal and thought that things was a bit loose myself. I super glued the seal around the glass then had my boy hold the assy in place from the inside and then took some speaker wire, ran it inside the part that goes around the liftgate hole, started by inserting the bottom in and worked the rest of the seal in place by pulling out the speaker wire. Everything got snug once installed. I took some pictures and can email you them tonight if you'd like. I didn't reinstall the tabs either.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com