You lost hydraulic pressure...


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Eric B. on Saturday, May 08, 2004 at 7:07PM :

In Reply to: clutch problem posted by John M on Saturday, May 08, 2004 at 5:44PM :

Either the slave cylinder, or the master cylinder for the clutch system went bad.

If you try and drive it, you will find that you can't shift cleanly.

Most of the time this is caused by the slave cylinder going bad.

Check the system fluid level, it will most likely be low, if so add more fluid, and try and bleed it.

I am going to bet the fluid will leak back out and you will not be able to bleed it.

If so replace or repair whatever is leaking and you should be back in business.

Good luck!

Eric




Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com