Re: I am fabricating one at this time...


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by John Eickhof on Monday, January 05, 2004 at 1:08AM :

In Reply to: M37 Defroster Suggestions? posted by Junior on Sunday, January 04, 2004 at 11:29PM :

I am using a M-151 heater mounted under the glove box of my M37, I am making a plenum out of thinwall 1" square tubing that will bolt to the windshield lock levers and will be fed with a 1.5" flex hose from the heater. I am going to slot the square tube with 8-10" slots at a diagonal angle so the air will be directed up and forward from the plenum. Mounting it this way, you can still drop the windshield frame down or open the windshields without any problem...and the original nameplates will not be disturbed! in the summer the flex hose is removed and thus is out of the way. I will post pix after I am done and it is tested!!



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com