Posted by Keith in Washington on Saturday, November 29, 2003 at 1:33PM :
Just test drove my ff PW after installing Helitool's under the floor boosted master cylinder. Nice to have some safety. It was a fairly straight forward install. I did use a different booster and master cylinder than Ray recommends. It provides better clearance with the PTO shift lever. The brakes work great the left rear wheel seems to lock up a little. A little adjustment is needed. I do need to hook up the vacuum line next. While I was at it all brake lines and hoses were replaced and I did put some residual pressure valves in both the front and rear lines. I also rebushed the clutch and brake peddles. It is really nice to have a nice tight system. Next step will be to install Ray's disks up front. I will do it in January after I get the rotors and calipers.
Follow Ups: