Posted by Chris Lube Lublin on Sunday, November 09, 2003 at 0:08AM :
In Reply to: Removing Pistons 230 and other questions posted by Rick on Saturday, November 08, 2003 at 8:45PM :
Take and fill a 20 oz pop bottle with a mixture of, Diesel fuel, ATF and Brake fluid. Shake it up and mix it, pour it into the cyls and let it set a few days. THen take a ride reamer and remove the ridge from upper end of cyls. Then take a hammer and softwood block and tap on the bottom of rods to push the piston out. If pistons still wont budge, put more of the Brakfluid,diesel ATF mix in, and let it set a few more days. Give the rods a light tapping a couple times a day to try to brake the rust free. Good luck!