Posted by Todd Wilson on Thursday, October 30, 2003 at 2:26PM :
In Reply to: Hey Todd Wilson Brake problem posted by DAVID B on Wednesday, October 29, 2003 at 9:57PM :
Well how did you bleed the brakes. ABS systems are sometimes real touchy on bleeding. Dont get them bled and they dont work right. Depending on how you bleed the brakes via vacuum,pressure or pumping your foot you may or may not have to crack the bleeders on the actualy ABS unit along with the wheel cylinders.
Also you changed the booster did you get the rod adjusted that goes from the pedal into the booster to push the master cylinder. If this is not adjusted it can cause all kinds of problems.
The reason why I asked all those other questions are that you now may have multiple problems to go along with your original problem. Brakes still dont work so that tells me you still have the original problem and now that you have put in a new master cylinder and booster you could have bleeding problems and or rod adjustment problems. Or your original problem is fixed but you have other problems from installing the new parts.
Gonna be tough to figure out. May have to start from 0 and go over every part of the braking system again and verify and double check.
Todd
Follow Ups: