Posted by Tim on Tuesday, September 23, 2003 at 11:09PM :
In Reply to: Great Minds Think Alike! posted by Marty on Tuesday, September 23, 2003 at 11:32AM :
I dont have any pictures yet, but I also did this about a week ago. I had a 3/4" stainless pipe coupling tigged over the filler plug on the master cyl. top plate. I then went with 3/4" copper pipe fittings and sweated them together. I put a union at the bottom so I can remove it if needed. At the top, I expanded out to 1" and back to a threaded end. A 1" brass plug with a "t" handle and vent hole complete the rig. It is free standing just in front of the firewall. It sure makes topping off the cyl. an easy task. (and it looks cool too!)