Posted by Willy-N on Tuesday, July 29, 2003 at 3:40PM :
In Reply to: Willy-N posted by CJ in AK on Tuesday, July 29, 2003 at 3:01PM :
Yours would be easy to make. Just remove your trim from above the windsheild and lay it on the end of a 4X8 sheet of material, trace it and mark the holes to match. Be sure to cut 1/8 inch behind the line you made off the trim. Then you need to make something to hold it up on the sides to fit your style of truck. The material only comes in 4X8 and the top is only 4 ft wide. The hard part is doing it with it matching up with the windsheid and back window all in one peice. A carry all would be a breeze. Just measure from the windsheild to where it is supposed to stop and cut the sheet that long. Use the left over 4X4 section to make some side sections to hold up the top with. Just measure and cut carboard to fit, if it does then cut the plastic the same way. Mark H.
Follow Ups: