Increasing the oil presure on a new engine


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Willy-N on Tuesday, June 03, 2003 at 9:34AM :

My old oil pump appeared to be ok. It gave me almost 50 psi when cold but would drop when the oil got good and warm. I knew my bearings were new so that was not the problem. When I changed the pump to a new one it went up to 55 cold and kept it at 42-45psi when good and warm instead of around 30psi. Now normal temps it stays around 50+ all the time at high idle (1,000rpms) and 42-45psi at 750rpms. So if you are having problems with oil presure you might just want to change the pump out. It could be a $50.00 fix to solve it. I also noticed the temp of the engine drop about 5 degs also. This is for the newbies tweeking there engines like me. Mark H.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com