Re: 440 swap in a 79 powerwagon


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]

Posted by Jim Patterson on March 18, 1999 at 11:17:36:

In Reply to: 440 swap in a 79 powerwagon posted by R Taylor on March 18, 1999 at 07:24:07:

The 400 and 440 were avail. until about 78, so those parts should be easy to find. As for the trans, you didn't say if it was a auto or stick. If your small block truck is an auto. Use the front half of the case on the trans you got with the engine. and use the tail housing and the main shaft off your truck now. The 203 and adaptor ( trans to x-fer case ) use the one you have now. Note: this will only work if you have a 727 trans not the 904. Look at pan, 727 has a bump out one side while 904's are almost square. As for motor mount brackets, they might still be avail. from Dodge. Jim


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]