Posted by JIM C. on October 01, 1997 at 21:07:03:
In Reply to: Re: HELP!! 6 VOLT TO 12 VOLT CONVERSION posted by chris on October 01, 1997 at 01:16:33:
:
: : I NEED SOME GUIDANCE OR DIRECTION ON THE BEST WAY TO CHANGE OVER TO 12 VOLTS ON MY '41 WC-12. HOW DOES THE POSITIVE GROUND AFFECT THIS CONVERSION?
: WC-53's and WC- 56s and 57s were 12 volt negative ground to begin with according to the manual I have. Vintage Power wagons did offer a kit for the 12 volt conversion.
: If yours was set up Pos ground then you will have to swap terminals with the wires on the ammeter, switch coils- hooking the wire from the switch to the + terminal of
: the 12 v coil. depending on what sending unit (2 wire or 1 wire) you have, you might have to switch places with the wires on back of the gauge. A resistor is needed in the
: hot wire going to the gauge if you use the 6 v unit. 3/4 WC's used the round S-W type of gauges making a swap to all 12 v easy. The 6 v starter seems to hold up well
: using 12 v. GM type internal regulator alternators with a "one wire " conversion are easy to put on,
: common and cheap (relatively). I like them anyway.
THANKS FOR YOUR HELP, CHRIS. DO I NEED A RESISTOR AT THE DISTRIBUTOR OR WILL THE POINTS/CONDENSER HOLD UP WITH THE 12 VOLTS? ANY PARTICULAR YEAR GM ALTERNATOR THAT YOU PREFER?